[Design and Technology] destech Digest, Vol 163, Issue 12

Laura Murphy pl at datta.vic.edu.au
Thu Nov 22 05:07:49 UTC 2018


Thank you Brendan!  Much appreciated

-----Original Message-----
From: destech [mailto:destech-bounces at edulists.com.au] On Behalf Of Brendan D'Arcy
Sent: Thursday, 22 November 2018 4:06 PM
To: destech at edulists.com.au
Subject: Re: [Design and Technology] destech Digest, Vol 163, Issue 12

Re: 3D printers

Hi Laura and co.,

Form my experience (after talking to many schools), the more popular 3D printers being used are as follows (in no particular order):

* Up Box (newer version) or Up Plus! 2 (older) - 3D printing systems
* Flashforge Inventor 3D printers 
* Flashforge dreamer 3D printer
* Makerbot - various to choose from, I don't have a lot of experience but they look good (expensive!).

Of course other brands are being used as well, but most school's I've seen use these.

We have the Up Plus 2! And Flashforge Inventor printers. The Up's are older, and simpler to use but have frequent calibration issues (students aren't the gentlest people about) and a few failed temperature sensors too. Price for the Up! Plus 2 is approx. $900-1000.
If you are going to use the UP printers, I'd recommend the Up Box - not sure of price but its enclosed and easier to manage.
The Flashforge's are dual head systems, easy to operate once you get used to the software and way more stable (less frequent calibration required). Flashforge inventor $1400 approx.

Ups and Flashforge are NOT cloudbased systems. USB lead or wifi (flashforge).

I hope this helps. Feel free to ask more questions if required.

Regards,

Brendan D’Arcy (TNBD)
Senior School Teacher
VCE Systems Engineering, 
Level A-E Design & Systems Technology and Mathematics


Kardinia International College
PO Box 17, Geelong, Victoria, 3220, Australia
Ph: +61 3 5278 9999          Fax:  +61 3 5278 9529
I b.darcy at kardinia.vic.edu.au  Click to find KIC I www.kardinia.vic.edu.au I



-----Original Message-----
From: destech [mailto:destech-bounces at edulists.com.au] On Behalf Of destech-request at edulists.com.au
Sent: Thursday, 22 November 2018 3:16 PM
To: destech at edulists.com.au
Subject: destech Digest, Vol 163, Issue 12

Send destech mailing list submissions to
	destech at edulists.com.au

To subscribe or unsubscribe via the World Wide Web, visit
	http://edulists.com.au/mailman/listinfo/destech
or, via email, send a message with subject or body 'help' to
	destech-request at edulists.com.au

You can reach the person managing the list at
	destech-owner at edulists.com.au

When replying, please edit your Subject line so it is more specific than "Re: Contents of destech digest..."


Today's Topics:

   1. FW: 3D printers (Laura Murphy)


----------------------------------------------------------------------

Message: 1
Date: Thu, 22 Nov 2018 04:15:48 +0000
From: Laura Murphy <pl at datta.vic.edu.au>
To: Design and Technology Teachers' Mailing List
	<destech at edulists.com.au>
Subject: [Design and Technology] FW: 3D printers
Message-ID:
	<A7564FEC5B25864A80B96365CB0D0FF7027B8F79EF at VICSERVER.dattavic.local>
Content-Type: text/plain; charset="utf-8"

Hi everyone, we’ve had an enquiry from a teacher about 3D printers -

Hi,
I work in a school that is considering buying 3D printers.
Some of the staff saw a presentation from a company known as Me3D.
The STEM co-ordinator along with 2 IT teachers keen to buy these as they are fully supported, but I was a bit concerned at the price, the fact that the software to print is cloud-based, and we have as a school only looked at this printer.

Having expressed this concern I have been given a week to come up with more data. So I was wondering if anyone at DATTA had looked into what most secondary schools are using and why.

Do any of you have advice we could pass on?  Thanks,

Laura


[signature 400]<http://dattaaustralia.com/2018conference>
Laura Murphy
Executive Education Officer
DATTA Vic
Level 2  The Dream Factory
90 Maribyrnong Street
Footscray VIC 3011
Phone: 03 9349 5809
Email: pl at datta.vic.edu.au<mailto:pl at datta.vic.edu.au>
Web: www.datta.vic.edu.au<http://www.datta.vic.edu.au/>
[cid:image002.png at 01D48276.3ECF45B0]





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://edulists.com.au/pipermail/destech/attachments/20181122/3c74cc14/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 33858 bytes
Desc: image001.jpg
URL: <http://edulists.com.au/pipermail/destech/attachments/20181122/3c74cc14/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 9663 bytes
Desc: image002.png
URL: <http://edulists.com.au/pipermail/destech/attachments/20181122/3c74cc14/attachment.png>

------------------------------

Subject: Digest Footer

_______________________________________________
destech mailing list
destech at edulists.com.au
http://edulists.com.au/mailman/listinfo/destech


------------------------------

End of destech Digest, Vol 163, Issue 12
****************************************

DISCLAIMER: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify us by return email. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the School.  The recipient should check this email and any attachments for the presence of viruses. The School accepts no liability for any damage caused by any virus transmitted by this email.   Please consider the environment before printing this email.
_______________________________________________
http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe
Design and Technology Mailing List kindly supported by
http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and
DATTA Vic - Design and Technology Teachers' Association of Victoria


More information about the destech mailing list