[Design and Technology] OHS space requirements in workshops

[Dawes, Paul j]

It all comes down to assessing risks and justifying the control measures (in this case, room size) for your individual application.  Rules & regulations now are no longer prescriptive ("thou shalt..."), but performance-based, which divests the department's responsibility for OHS and becomes the principal's or HOD's responsibility. Using the "blue book" or other information would be a good starting point in assigning room sizes, etc... but if a principal or HOD cannot justify the decisions they made and an accident occured, then it is their head on the block. Identifying hazards, assessing the  risk & justifying control measures in writing, whilst cumbersome & onerous, will cover your rear end.

Paul Dawes
Materials & Design Technology Manager
Patterson River Secondary College
Eel Race Road, Carrum 3197
(t) 8770 6700
(f) 9786 9810
(m) 0417 983 711
 
This email and any files transmitted with it are priveliged and confidential information intended solely for the use of the addressee.  If you have received this email in error you must not disseminate, copy or take any action in reliance on it.  Please immediately notify PRSC by return email to the sender and delete the original email.


-----Original Message-----
From: destech-bounces at edulists.com.au [mailto:destech-bounces at edulists.com.au] On Behalf Of Richard Bazeley
Sent: Wednesday, 9 March 2011 5:02 PM
To: 'Design and Technology Teachers' Mailing List'
Subject: Re: [Design and Technology] OHS space requirements in workshops

I am sure we would all like to see that one. Most of the information put out
by the Department concerns the safe use of machinery. However there must be
some guidelines for architects for the design of the Trade Training centres
about how much space should be available per student in a Technology room.
It also comes down to how many the principal thinks should be in the room.
Were "practicable" I believe is the expression.
Below is a link to information that is available to NSW Industrial Arts
Teachers regarding machinery safe work areas.
http://web2.warilla-h.schools.nsw.edu.au/dept/Industrial%20Arts/Improving%20
workshop%20safety/iws/docs/inf_inst/bandsaw_metal_wood.pdf
Good Luck
Richard Bazeley
St.Arnaud


-----Original Message-----
From: destech-bounces at edulists.com.au
[mailto:destech-bounces at edulists.com.au] On Behalf Of Marshall Ian
Sent: Wednesday, 9 March 2011 1:39 PM
To: Design and Technology Teachers' Mailing List
Subject: [Design and Technology] OHS space requirements in workshops

Would anyone have information regarding OHS safety requirements and how to
calculate workshop space required per student (in Victoria)?
I have heard of a "blue book" in NSW which outlines all such information. Is
there some equivalent source in Victoria?
Ian Marshall


NOTE:
This message and its attachments (Communication) is intended for the named
person/s use only. It may contain confidential, proprietary or legally
privileged information and may be under copyright. No confidentiality,
privilege or copyright is waived or lost by any mistransmission. If you
receive this Communication in error, please immediately delete it and all
copies of it from your system, destroy any hard copies of it and notify the
sender. If you are not the intended recipient you must not, directly or
indirectly, use, disclose, distribute, print, forward, save, rely on or copy
any part of this Communication.

Monivae College and its associated bodies and committees do not accept any
liability in connection with transmission of information using the internet
and/or in connection with computer virus, data, corruption, delay,
interruption, errors, omissions, loss and/or damage, unauthorised access or
unauthorised amendments arising from using, opening, or transmitting this
Communication.

Any views expressed in this message are those of the individual sender,
except where the message states otherwise and the sender is authorised to
state them to be the views of any such entity.

Monivae College has taken precautions to minimise the risk of transmitting
software viruses, but we advise you to carry out your own virus checks on
any attachment to this message. This notice should not be deleted or
altered.


_______________________________________________
http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe
Design and Technology Mailing List kindly supported by
http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  -
Victorian Curriculum and Assessment Authority and
DATTA Vic - Design and Technology Teachers' Association of Victoria

_______________________________________________
http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe
Design and Technology Mailing List kindly supported by
http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and
DATTA Vic - Design and Technology Teachers' Association of Victoria

Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.