[Year 12 SofDev] 2015 Exam Query

Andrew Shortell shortell at get2me.net
Tue Aug 30 10:33:06 AEST 2016


C is nto plausible when setting up a network or with a network already in place where there are no free access points

the cost and labour and time to run a cat 6 utp cable to a particular point inside the walls and then add the actual rj45 is prohibitive
It costs $50 for an electrician to just the wires in the back of an rj45, let alone put the plate in the wall  —> 3 weeks

for your ordinary school network it is merely a matter of putting in a valid user name and password —> ten seconds

very few wired networks run lots of extra points as each point costs well over $100 to install plus cable

Wireless is already there.

Perhaps the question should have clearly excluded ad hoc low effort home networks — but this subject is not about home networks
Very few home networks safely install cable in the walls and wire up proper access points.
I did and that is how I know how much it costs, but there are no OHS issues with cables all over the place.

Andrew


Andrew Shortell
Educator
CRC Melton


shortell at get2me.net (This List)
@acsbear8 (twitter)






> On 30 Aug 2016, at 10:20 am, Selina Dennis <selina at dennis.net.au> wrote:
> 
> Hi Carlin,
>  
> Depending on both the wired and the wireless setup, I could see “C” as being justifiable.
>  
> Most wired networks tend to be “plug-and-play” and on these types of networks, it would be faster to add a computer to a wired network when compared to some wireless networks. For example, at home our wireless has a password to access it, but we also use MAC address whitelisting (which is an easy configuration option in the router). It’s far easier to add a new desktop to our network with a Cat5/6 cable than it is to add it via wireless, as we don’t need to enter the MAC address to the white-list if it’s cabled. Adding systems to our wireless network is officially a “pain in the ass” as unless you can easily find the MAC address of the system (which can vary in difficulty depending on what device it is), then the process we need to take is quite tedious. 
>  
> (For interest, it involves turning off wireless access on the router, disabling MAC address filtering, turning wireless access back on, connecting the new device, refreshing the connected device list, comparing the MAC addresses connected to find the new one, adding the new one, stopping the wireless services, re-enabling the MAC address filtering, and then turning the whitelist back on). 
>  
> (Also for interest, it is relatively straightforward to set up a similar MAC address filtering system via a wired network with MAC address whitelists.)  
>  
> I would argue that our wireless network at home is by default more secure than our wired network, as to get access to our wired network, you just need to find a port and plug it in – our home has many windows for easy “home invasion” access! (This might mean that answer “A” is also plausible!)
>  
> Perhaps the question should have had a scenario attached to it with some more information to make it clearer for students, or been presented as a short answer question.
>  
> Hope that helps,
>  
> Selina Dennis
> Strathmore Secondary College
>   <>
> From: sofdev-bounces at edulists.com.au <mailto:sofdev-bounces at edulists.com.au> [mailto:sofdev-bounces at edulists.com.au <mailto:sofdev-bounces at edulists.com.au>] On Behalf Of Grieve, Carlin C
> Sent: Tuesday, 30 August 2016 9:37 AM
> To: Year 12 Software Development Teachers' Mailing List <sofdev at edulists.com.au <mailto:sofdev at edulists.com.au>>
> Subject: [Year 12 SofDev] 2015 Exam Query
>  
> Hi All,
>  
> Going through the 2015 exam and had a query regarding one of the multiple choice questions. 
>  
> From 2015 Exam;
> Question 14
>                Which one of the following best describes a wired network when compared with a wireless network?
> A.      Easier to install, easier to add computers, less secure
> B.       Easier to install, harder to add computers, less secure
> C.       Harder to install, easier to add computers, more secure
> D.      Harder to install, harder to add computers, more secure
>  
> D is the correct answer, however is there a justified argument for C?
>  
> Kind Regards,
> <image002.png>
>  
>  
> Carlin Grieve
> Learning Technologies Leading Teacher
> Epping Secondary College
> T: +61 3 9401 2599
> W:www.eppingsc.vic.edu.au <http://www.eppingsc.vic.edu.au/>
>  
>  
>  
> IMPORTANT - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Training.
>  
> _______________________________________________
> http://www.edulists.com.au <http://www.edulists.com.au/> - FAQ, Subscribe, Unsubscribe
> IT Software Development Mailing List kindly supported by
> http://www.vcaa.vic.edu.au <http://www.vcaa.vic.edu.au/> - Victorian Curriculum and Assessment Authority and
> http://www.vcaa.vic.edu.au/vce/studies/infotech/softwaredevel3-4.html <http://www.vcaa.vic.edu.au/vce/studies/infotech/softwaredevel3-4.html> 
> http://www.vitta.org.au <http://www.vitta.org.au/>  - VITTA Victorian Information Technology Teachers Association Inc
> http://www.swinburne.edu.au/ict/schools <http://www.swinburne.edu.au/ict/schools> - Swinburne University

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.edulists.com.au/pipermail/sofdev/attachments/20160830/b08a6d45/attachment-0001.html 


More information about the sofdev mailing list