[Design and Technology] destech Digest, Vol 140, Issue 2

Tim Lake tim.lake at cornishcollege.vic.edu.au
Fri Oct 7 12:22:01 AEDT 2016


Hi.

I recently bought some off ebay but the issue is getting the correct size
(therefore resistance). If you have a piece of the existing wire, you could
measure its diameter using a micrometer and then ensure that what you buy is
the same diameter. If not it will be either too hot or too cold.

Failing that you could try Hobby Tools Australia in Braeside ­ 9587 7734

Regards

Mr Tim Lake
Design & Technology Teacher
Middle Years Leader Assistant
Year 8 Form Teacher
Cornish College
 

65 Riverend Road
Bangholme VIC 3175
 

Tel: +613 9781 9000
Fax: +613 9773 1726
 
www.cornishcollege.vic.edu.au <http://www.cornishcollege.vic.edu.au/>

From:  <destech-request at edulists.com.au>
Reply-To:  <destech at edulists.com.au>
Date:  Friday, 7 October 2016 12:00 pm
To:  <destech at edulists.com.au>
Subject:  destech Digest, Vol 140, Issue 2

Send destech mailing list submissions to
destech at edulists.com.au

To subscribe or unsubscribe via the World Wide Web, visit
http://www.edulists.com.au/mailman/listinfo/destech
or, via email, send a message with subject or body 'help' to
destech-request at edulists.com.au

You can reach the person managing the list at
destech-owner at edulists.com.au

When replying, please edit your Subject line so it is more specific
than "Re: Contents of destech digest..."


Today's Topics:

   1. Wire for strip heater. (Mcintyre, Stuart S)


----------------------------------------------------------------------

Message: 1
Date: Thu, 6 Oct 2016 01:57:16 +0000
From: "Mcintyre, Stuart S" <mcintyre.stuart.s at edumail.vic.gov.au>
Subject: [Design and Technology] Wire for strip heater.
To: "destech at edulists.com.au" <destech at edulists.com.au>
Message-ID:
<E9F46860B6A8C04292FDB4AA61B7075195119B90 at EDUMBX10.education.vic.gov.au>
Content-Type: text/plain; charset="us-ascii"

Hi all,
I have an old plastic strip heater that uses wire as the heating element but
it seems to have broken. Anyone know where I can get some spare wirefrom.
Have tried Jaycar with no success. Is it a special type of wire? Some
research tells me it's nichrome wire.
Thanks in advance for any help.
Stuart

Stuart McIntyre
Learning Area Leader - Arts/Technology
Mordialloc College
03 9580 1184

[cid:image001.png at 01D21FD1.29D645A0]


IMPORTANT - This email and any attachments may be confidential. If received
in error, please contact us and delete all copies. Before opening or using
attachments check them for viruses and defects. Regardless of any loss,
damage or consequence, whether caused by the negligence of the sender or
not, resulting directly or indirectly from the use of any attached files our
liability is limited to resupplying any affected attachments. Any
representations or opinions expressed are those of the individual sender,
and not necessarily those of the Department of Education and Training.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://www.edulists.com.au/pipermail/destech/attachments/20161006/5065ae73/a
ttachment-0001.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 12210 bytes
Desc: image001.png
Url : 
http://www.edulists.com.au/pipermail/destech/attachments/20161006/5065ae73/i
mage001-0001.png 

------------------------------

_______________________________________________
destech mailing list
destech at edulists.com.au
http://www.edulists.com.au/mailman/listinfo/destech


End of destech Digest, Vol 140, Issue 2
***************************************



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.edulists.com.au/pipermail/destech/attachments/20161007/bac811d3/attachment.html 


More information about the destech mailing list