[Design and Technology] Purchase belt sander

Pitt, David pi at camhigh.vic.edu.au
Mon Jun 20 10:21:13 AEST 2016


Assuming proper risk management – yes.

No worries about that – highlighted yellow.

Of course, this involves having students pass a “safe use competency test”, essentially ensuring students can demonstrate and explain how to follow the Risk Controls you have in place and use the machine competently and safely within the guidelines you set.  I tend to do them as a class.

Cutting

Shaping

Joining

​Finishing

·         Cold Metal Drop Saw
·         Power Hacksaw
·         Jig Saw
·         Scroll saw
·         Cold Metal Saw
·         Small mitre saw (with simple drop saw action and work piece secured by clamps or similar constraint)
·         Metal Cutting ‘Horizontal’ Band Saw

·         Wood Lathe
·         Metalworking Lathe
·         Plunge Router – where used with either a  template or guide fence or, a ball-bearing profile cutter
·         Milling Machine
·         Angle Grinder

·         Welding
·         Biscuit Jointer
·         Dowling or Horizontal Drill
·         Drill Press (Pedestal or Bench)

·         ​Linisher (belt & Disc sander)
·         Sanders (Belt & Orbital)



This is the department’s competency test (attached) – it’s a bit onerous.  There are others that exists, both proprietary  (onGuard, etc) and free, but you just need to make sure you document that they have passed some test explaining that they are competent, and have peace of mind that it explains enough to stand up in court!  :D  I know a lot of people edit and make their own from the Safe Use of Machinery booklets that you get during the course.


Cheers,
David Pitt.
Technology Coordinator
Camberwell High School.




From: destech-bounces at edulists.com.au [mailto:destech-bounces at edulists.com.au] On Behalf Of Lambert Dean
Sent: Monday, 20 June 2016 9:45 AM
To: Design and Technology Teachers' Mailing List (destech at edulists.com.au)
Subject: [Design and Technology] Purchase belt sander

Morning All,


We are in the process of looking at buying a new belt sander, Carbatec 6 inch, by 9 inch combo disc belt sander $350 approx, any advice if these can be operated by 7 year 7-8 students? Obviously thorough RA / RC will be implemented.

Regards

Dean.

[Description: Description: cid:315320004 at 31012008-0F05]


Dean Lambert
Faculty Leader - Technology
John Paul College
McMahons Road
Frankston VIC 3199
Ph 9784 0375




This email and any attachments may be confidential. You must not disclose or use the information in this email if you are not the intended recipient. If you have received this email in error, please notify us immediately and delete the email and all copies. The College does not guarantee that this email is virus or error free. The attached files are provided and may only be used on the basis that the user assumes all responsibility for any loss, damage or consequence resulting directly or indirectly from the use of the attached files, whether caused by the negligence of the sender or not. The content and opinions in this email are not necessarily those of the College.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.edulists.com.au/pipermail/destech/attachments/20160620/0102b896/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3172 bytes
Desc: image001.jpg
Url : http://www.edulists.com.au/pipermail/destech/attachments/20160620/0102b896/image001-0001.jpg 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: safeusemachinerytechbooklet.doc
Type: application/msword
Size: 599552 bytes
Desc: safeusemachinerytechbooklet.doc
Url : http://www.edulists.com.au/pipermail/destech/attachments/20160620/0102b896/safeusemachinerytechbooklet-0001.doc 


More information about the destech mailing list