[Design and Technology] destech Digest, Vol 85, Issue 16 Re: Openlearning and Technology (Grech, Mark A)

Foster, David B foster.david.b at edumail.vic.gov.au
Tue Mar 27 21:10:40 EST 2012


Hi Mark, thanks for getting back so quickly. We have suggested to having classes that are the same running a the same time, but we were ignored by the previous admin leaders. Hopefully our new principal will be more broard minded.
I personally would like to take up your offer to come and visit. I will try to give you a ring before the week is out.

Cheers, David

________________________________________
From: destech-bounces at edulists.com.au [destech-bounces at edulists.com.au] on behalf of destech-request at edulists.com.au [destech-request at edulists.com.au]
Sent: Tuesday, 27 March 2012 9:14 AM
To: destech at edulists.com.au
Subject: destech Digest, Vol 85, Issue 16

Send destech mailing list submissions to
        destech at edulists.com.au

To subscribe or unsubscribe via the World Wide Web, visit
        http://www.edulists.com.au/mailman/listinfo/destech
or, via email, send a message with subject or body 'help' to
        destech-request at edulists.com.au

You can reach the person managing the list at
        destech-owner at edulists.com.au

When replying, please edit your Subject line so it is more specific
than "Re: Contents of destech digest..."


Today's Topics:

   1. Re: Recs for Vac former and 3D printer (Turri, Gaylene M)
   2. Openlearning and Technology (Foster, David B)
   3. Re: Openlearning and Technology (Grech, Mark A)


----------------------------------------------------------------------

Message: 1
Date: Mon, 26 Mar 2012 06:25:27 +0000
From: "Turri, Gaylene M" <turri.gaylene.m at edumail.vic.gov.au>
Subject: Re: [Design and Technology] Recs for Vac former and 3D
        printer
To: "Design and Technology Teachers' Mailing List"
        <destech at edulists.com.au>
Message-ID: <26A118BE-6CD2-4C1B-BE82-673101B99589 at edumail.vic.gov.au>
Content-Type: text/plain; charset="us-ascii"

I enjoy some of the banter and conversations it's amazing wot u learn without specifics.
Cheers GaylEne


Sent from my iPhone

On 26/03/2012, at 5:21 PM, "VERSTRAETEN Gabriella" <gab.verstraeten at thomascarr.vic.edu.au> wrote:

> Aww Robin - I was kinda enjoying all that - hi
> Regards
> Gabriella
>
>
> Gabriella Verstraeten
> Technology Teacher - Textiles
>
>
> Thomas Carr College
> 35 Thomas Carr Drive,
> Tarneit, VIC 3029
> (P) (03) 8734 2444
> (F) (03) 9748 4388
> (E) gab.verstraeten at thomascarr.vic.edu.au
>
> IMPORTANT! This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Thomas Carr College does not represent or warrant that the attached files are free from computer viruses or other defects. The attached files are provided, and may only be used, on the basis that the user assumes all responsibility for any loss, damage or consequence resulting directly or indirectly from the use of the attached files, whether caused by the negligence of the sender or not. Any representations or opinions expressed in this email are those of the individual sender, and not necessarily those of Thomas Carr College.
> Please consider the environment before printing this email
>
> -----Original Message-----
> From: destech-bounces at edulists.com.au [mailto:destech-bounces at edulists.com.au] On Behalf Of Robin Panousieris
> Sent: Monday, 26 March 2012 4:40 PM
> To: 'Design and Technology Teachers' Mailing List'
> Subject: Re: [Design and Technology] Recs for Vac former and 3D printer
>
> Katie if you would like contact people directly rather than inform all the recipients on this mailing list please double click on the persons contact email
>
> Thanks
>
> Robin Panousieris
> Assumption college Kilmore
>
>
>
> -----Original Message-----
> From: destech-bounces at edulists.com.au
> [mailto:destech-bounces at edulists.com.au] On Behalf Of Katie Harris
> Sent: Monday, 26 March 2012 2:07 PM
> To: Design and Technology Teachers' Mailing List
> Subject: Re: [Design and Technology] Recs for Vac former and 3D printer
>
> Thanks Peter!
>
> I stand by my previous flattery of 'amazing' and throw in a 'handsome'
> too.
>
> Best Wishes,
> Katie
>
> -----Original Message-----
> From: Clinton, Peter [mailto:ClintonP at trinity.vic.edu.au]
> Sent: Monday, 26 March 2012 2:35 PM
> To: Design and Technology Teachers' Mailing List
> Subject: Re: [Design and Technology] Recs for Vac former and 3D printer
>
> Hi Katie
>
> Good to hear from you
>
> I have been using and have been very happy with Leuco (formerly Shoda
> Travers) for decades :
> Leuco Australia Pty Ltd
> 174 Boundary Road
> Braeside 3195 Victoria. (03) 9580-7055
>
> Best regards (flattery will get you everywhere!) Peter
>
> -----Original Message-----
> From: destech-bounces at edulists.com.au
> [mailto:destech-bounces at edulists.com.au] On Behalf Of Katie Harris
> Sent: Monday, 26 March 2012 1:30 PM
> To: Design and Technology Teachers' Mailing List
> Subject: Re: [Design and Technology] Recs for Vac former and 3D printer
>
> Thanks Foster!
>
> Could you let me know who you guys get in to sharpen machine blades (buzzer, thicknesser and such)? Or does the amazing and talented Mr Clinton do this for you? The last lot we had through were shocking and I'm looking for someone new.
>
> I think your 3D printer is a bit out of our league :)
>
> I might have to organize a PD day to come and visit you gents soon, if that would be okay.
>
> Thanks for your help.
>
> Cheers,
> Katie
>
> -----Original Message-----
> From: Adem, Foster [mailto:ademf at trinity.vic.edu.au]
> Sent: Monday, 26 March 2012 1:05 PM
> To: Design and Technology Teachers' Mailing List
> Subject: Re: [Design and Technology] Recs for Vac former and 3D printer
>
> Hi Katie,
> Congrat's on Head of Department appointment; what red rocket you are!!!
> You know the details of our 3D printer at TGS.
>
> Best wishes,
> Foster
>
> -----Original Message-----
> From: destech-bounces at edulists.com.au
> [mailto:destech-bounces at edulists.com.au] On Behalf Of Katie Harris
> Sent: Friday, 23 March 2012 2:05 PM
> To: Design and Technology Teachers' Mailing List
> Subject: [Design and Technology] Recs for Vac former and 3D printer
>
> Hi all,
>
> I'm looking for recommendations for a vacuum former and 3D printer to purchase for our school. Can anyone who has these machines let me know what make/model they are using and if they're happy with them?
>
> Also, any suggestions of preferred companies to buy from would be ideal.
>
> Thanks for any/all help.
>
> Kind Regards,
>
>
> Katie Harris
>
> Head of Faculty - Technology
> Aitken College
> Ph: 9333 9179
>
>
>
> _______________________________________________
> http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe Design and Technology Mailing List kindly supported by http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and DATTA Vic - Design and Technology Teachers' Association of Victoria
>
> _______________________________________________
> http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe Design and Technology Mailing List kindly supported by http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and DATTA Vic - Design and Technology Teachers' Association of Victoria
>
> _______________________________________________
> http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe Design and Technology Mailing List kindly supported by http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and DATTA Vic - Design and Technology Teachers' Association of Victoria
>
> _______________________________________________
> http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe Design and Technology Mailing List kindly supported by http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and DATTA Vic - Design and Technology Teachers' Association of Victoria
>
> _______________________________________________
> http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe Design and Technology Mailing List kindly supported by http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and DATTA Vic - Design and Technology Teachers' Association of Victoria
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.1913 / Virus Database: 2114/4894 - Release Date: 03/25/12
>
> _______________________________________________
> http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe Design and Technology Mailing List kindly supported by http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and DATTA Vic - Design and Technology Teachers' Association of Victoria
>
> _______________________________________________
> http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe
> Design and Technology Mailing List kindly supported by
> http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html  - Victorian Curriculum and Assessment Authority and
> DATTA Vic - Design and Technology Teachers' Association of Victoria

Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.



------------------------------

Message: 2
Date: Mon, 26 Mar 2012 10:40:35 +0000
From: "Foster, David B" <foster.david.b at edumail.vic.gov.au>
Subject: [Design and Technology] Openlearning and Technology
To: "destech at edulists.com.au" <destech at edulists.com.au>
Message-ID:
        <34D71BE37AC46044965A22E50A0CEBAA0FB469 at EDUMBX07.education.vic.gov.au>
Content-Type: text/plain; charset="iso-8859-1"

Hello all,



I am seeking some help on behalf of my fellow technology teachers. We have moved into our new POD building but our admin have not been able to help us with how we fit into the open-learning curriculum. We have one technology room, to cater for systems and design and we now have 40 students in this one room.

The admin has a vision for junior level classes but they have not thought about how this will blend into VCE. I was hoping there are schools out there that have dealt with this problem, my staff are struggling and our new principal has encouraged us to seek help, weather locally, Melbourne or interstate.



Regards, David Foster



Design and Technology Leader

Western Heights College

03 5277 1177

Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.edulists.com.au/pipermail/destech/attachments/20120326/69ddf790/attachment-0001.html

------------------------------

Message: 3
Date: Mon, 26 Mar 2012 22:14:14 +0000
From: "Grech, Mark A" <grech.mark.a at edumail.vic.gov.au>
Subject: Re: [Design and Technology] Openlearning and Technology
To: "Design and Technology Teachers' Mailing List"
        <destech at edulists.com.au>
Message-ID:
        <E591ABEB37DA8846B45EE29FE827751B480AEE at EDUMBX06.education.vic.gov.au>
Content-Type: text/plain; charset="iso-8859-1"

Hi David

At Wangaratta HS we have a new (12 months old) open "flexible" work space which was "designed" for 3 classes of 25 students, (1 Metal and 2 wood). We have faced a number of issues with the space which we are attempting to over-come.

The biggest issue is timetabling and getting the mix of classes right. It is very difficult when you are teaching cross purposes. It works best when you double up on classes e.g. 2 yr 7 wood classes or two yr 8 classes etc. Otherwise delivery is very difficult. Having three classes on at once is very noisey and a little stressful so we try to minimize this happening (difficult to acheive sometimes).

As you could imagine the movement of students is also an issue especially if there are 75 students and three teachers using the workspace.

We have found teaching unit 1 & 3 classes works really well in the space you just need to make sure you are well organised and keep each other in the loop about what you are planning. The other thing that is important is that you have plenty of tools and equipment to share around at peak times (managing all this of course is another issue!).

If you want to come and see our space or chat over the phone please feel free to ring me on 57230500.

Regards

Mark

________________________________
From: destech-bounces at edulists.com.au [destech-bounces at edulists.com.au] on behalf of Foster, David B [foster.david.b at edumail.vic.gov.au]
Sent: Monday, 26 March 2012 9:40 PM
To: destech at edulists.com.au
Subject: [Design and Technology] Openlearning and Technology


Hello all,



I am seeking some help on behalf of my fellow technology teachers. We have moved into our new POD building but our admin have not been able to help us with how we fit into the open-learning curriculum. We have one technology room, to cater for systems and design and we now have 40 students in this one room.

The admin has a vision for junior level classes but they have not thought about how this will blend into VCE. I was hoping there are schools out there that have dealt with this problem, my staff are struggling and our new principal has encouraged us to seek help, weather locally, Melbourne or interstate.



Regards, David Foster



Design and Technology Leader

Western Heights College

03 5277 1177

Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.

Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.edulists.com.au/pipermail/destech/attachments/20120326/9ffb7cd9/attachment.html

------------------------------

_______________________________________________
destech mailing list
destech at edulists.com.au
http://www.edulists.com.au/mailman/listinfo/destech


End of destech Digest, Vol 85, Issue 16
***************************************
Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.



More information about the destech mailing list