[Design and Technology] Material Characteristics & Properties

Heather Aeschlimann aeschlimann.heather.j at edumail.vic.gov.au
Thu Mar 5 11:36:27 EST 2009


Also remember that that the text book is NOT the study design.

There were issues with HDD exam having a question on it that was not covered
in the text book but was part of the study design.

Page 36 Study Design- "properties and characteristics such as strength,
durability, thermal resistance, hardness, density, rigidity, compatibility
of materials". The key knowledge is "factors that determine choice of
suitable materials".

Cheers, Heather

 

 

From: destech-bounces at edulists.com.au
[mailto:destech-bounces at edulists.com.au] On Behalf Of Jacinta O'Leary
Sent: Thursday, 5 March 2009 10:41 AM
To: Design and Technology Teachers' Mailing List
Subject: RE: [Design and Technology] Material Characteristics & Properties

 

Hi Melissa

 

All I can say is that . when you really look into characteristics and
properties over a wide range of materials there is a lot of overlap.
Sometimes in timber, characteristics refers to the appearance which is
slightly different from your interpretation below for fabric, and properties
refers more to how the material behaves.

My approach is to use the two words together and not be too particular about
the difference.

 

Hope this helps - others may differ?

Jacinta 

 

  _____  

From: destech-bounces at edulists.com.au
[mailto:destech-bounces at edulists.com.au] On Behalf Of Melissa Treverton
Sent: Thursday, 5 March 2009 10:21 AM
To: destech at edulists.com.au
Subject: [Design and Technology] Material Characteristics & Properties

 

Hi all,

 

Hoping for some clarification of terms.

 

In the DESIGN FACTORS & APPLICATIONS the term Materials - Characteristics &
Properties is used.  However when looking at fabrics in the text books the
term Characteristics never appears.

 

My interpretation was

 

Materials characteristics - what the fabric can do (i.e stretch,
transparent)

 

Material properties - The origin of the fabric and its construction (i.e
polyester plain weave)

 

 

However in the text books the use the term Properties to discuss what the
fabric can do and a whole range of terms to discuss the origin &
construction method (i.e identification, forms)

 

I am of the understanding we should be using consistent terminology based on
the Design Factors & Fundamentals.

 

 

Any advice/feedback welcome !

 

Thanks

 

Melissa Treverton

Textiles

Parkdale Secondary College

Warren Rd, Mordialloc East

 

treverton.melissa.j at edumail.vic.gov.au 

 

 

 

Important - This email and any attachments may be confidential. If received
in error, please contact us and delete all copies. Before opening or using
attachments check them for viruses and defects. Regardless of any loss,
damage or consequence, whether caused by the negligence of the sender or
not, resulting directly or indirectly from the use of any attached files our
liability is limited to resupplying any affected attachments. Any
representations or opinions expressed are those of the individual sender,
and not necessarily those of the Department of Education and Early Childhood
Development.

_______________________________________________ 
http://www.edulists.com.au  <http://www.edulists.com.au> - FAQ, resources,
subscribe, unsubscribe 
Design and Technology Mailing List kindly supported by 
http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html
<http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html%20%20>
- Victorian Curriculum and Assessment Authority and 
DATTA Vic - Design and Technology Teachers' Association of Victoria 
_____________________________________________________________________ 
This e-mail has been scanned for viruses by MCI's Internet Managed 
Scanning Services - powered by MessageLabs. For further information 
visit http://www.mci.com


_____________________________________________________________________ 
This e-mail has been scanned for viruses by MCI's Internet Managed 
Scanning Services - powered by MessageLabs. For further information 
visit http://www.mci.com
_______________________________________________ 
http://www.edulists.com.au  <http://www.edulists.com.au> - FAQ, resources,
subscribe, unsubscribe 
Design and Technology Mailing List kindly supported by 
http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html
<http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html%20%20>
- Victorian Curriculum and Assessment Authority and 
DATTA Vic - Design and Technology Teachers' Association of Victoria


Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.edulists.com.au/pipermail/destech/attachments/20090305/5570a409/attachment-0001.html


More information about the destech mailing list