[Design and Technology] CAD program

[SHANE CROWHURST]

Roger,

 

I have just returned from the PSCIA conference in Albury.

One of the presenters was Dr Tony Pugatschew from Intellecta
Technologies with his demo of a Roland MDX-40 3D modelling machine.

He used and recommended the Pro Engineer program and you.

 

Can you put me on a list or something for information about the next
course, as I found the website posed too many questions.

 

Thanks, Shane. 

 

From: destech-bounces at edulists.com.au
[mailto:destech-bounces at edulists.com.au] On Behalf Of Roger Knight
Sent: Wednesday, 24 June 2009 3:26 PM
To: Design and Technology Teachers' Mailing List
Subject: RE: [Design and Technology] CAD program

 

 Catherine

 

I can thoroughly recommend Pro Engineer. This is a free 3D package by
PTC the world industry leader in 3D modelling.

To obtain the software teachers must complete a 12hr training course at
a cost of approx. $300.00. On completion of the course they receive the
software discs (schools edition) and each teacher is then able to
authorise a site licence for 300 seats.

DATTA Vic run these courses for which I am the instructor. We will be
running courses in term 3. Check with DATTA vic fro details.

The PTC website can be found at 

 

http://ptc.com/

 

Best regards ... Roger

 

Roger Knight

Technology Faculty.

St Patrick's College

1431 Sturt Street

BALLARAT 3350 VIC

5331 1688

Mobile 0424395401

rknight at stpats.vic.edu.au

 

________________________________

From: Ortlieb, Catherine S
Sent: Wed 24/06/2009 2:46 PM
To: destech at edulists.com.au
Subject: [Design and Technology] CAD program

A couple of years ago, we switched from using TriCAD to Solid Edge for
our Year 9 CAD elective. It was also being used by senior technology
students in subjects such as Wood.  Apart from being a much superior
program, the licence fee was very attractive.  This year we experienced
some difficulties as the company has new owners.  They want about $6,000
for the licence next year which we can't afford. Can anyone suggest
suitable alternative CAD software which isn't so expensive?

Thanks

Cath Ortlieb, Croydon Secondary College

Important - This email and any attachments may be confidential. If
received in error, please contact us and delete all copies. Before
opening or using attachments check them for viruses and defects.
Regardless of any loss, damage or consequence, whether caused by the
negligence of the sender or not, resulting directly or indirectly from
the use of any attached files our liability is limited to resupplying
any affected attachments. Any representations or opinions expressed are
those of the individual sender, and not necessarily those of the
Department of Education and Early Childhood Development.

_______________________________________________ 
http://www.edulists.com.au/- FAQ, resources, subscribe, unsubscribe 
Design and Technology Mailing List kindly supported by 
http://www.vcaa.vic.edu.au/vce/studies/des! igntech/destechindex.html
<http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html> -
Victorian Curriculum and Assessment Authority and 
DATTA Vic - Design and Technology Teachers' Association of Victoria 

_______________________________________________ 
http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe 
Design and Technology Mailing List kindly supported by 
http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html
<http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html%20%
20> - Victorian Curriculum and Assessment Authority and 
DATTA Vic - Design and Technology Teachers' Association of Victoria

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.edulists.com.au/pipermail/destech/attachments/20090625/ec462368/attachment-0001.html