[Design and Technology] Design & Tech - Fabric

[Aeschlimann, Heather j]

This year I had 10 year 11's and 8 year 12's doing wood Design and Tech.
The theory side is hardest and I did not give the year 11's much
attention. The only way I coped was not to do 2 completed products at
year 11. They did all the design work and made scale models of chosen
designs and evaluations of these models. It is hard to decide. The other
option that I have chosen for next year is to have advanced placements.
All my year 11's will be doing units 3 & 4.

Heather 

 

________________________________

From: destech-bounces at edulists.com.au
[mailto:destech-bounces at edulists.com.au] On Behalf Of Petrulis,Madeleine
Sent: Friday, 19 October 2007 9:33 AM
To: destech at edulists.com.au
Subject: [Design and Technology] Design & Tech - Fabric

 

Good Morning to All,

 

I have just found out that my load for next year has year 11 & 12 Design
& Technology combined!!! After the initial shock, I now need to get
myself organized. Is there anyone out there that could offer me some
advise with the experience of a combo class I will have 7 year 12's and
10 Year 11's.

 

Thank you in anticipation,

Madeleine Petrulis 

 

Mater Christi College

Belgrave

 

IMPORTANT - This email and any attachments may be confidential. If
received in error, 
please contact us and delete all copies. Mater Christi College does not
represent or warrant 
that the attached files are free from computer viruses or other defects.

The attached files are provided, and may only be used, on the basis that
the user assumes all
responsibility for any loss, damage or consequence resulting directly or
indirectly from the use 
of the attached files, whether caused by the negligence of the sender or
not. 
The liability of Mater Christi College is limited in any event to either
the resupply of the 
attached files or the cost of having the attached files resupplied. Any
representations or 
opinions expressed in this email are those of the individual sender, and
not necessarily 
those of Mater Christi College.

_______________________________________________ 
http://www.edulists.com.au - FAQ, resources, subscribe, unsubscribe 
Design and Technology Mailing List kindly supported by 
http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html
<http://www.vcaa.vic.edu.au/vce/studies/designtech/destechindex.html%20%
20> - Victorian Curriculum and Assessment Authority and 
TEAV - Technology Education Association of Victoria


Important - This email and any attachments may be confidential. If received in error, please contact us and delete all copies. Before opening or using attachments check them for viruses and defects. Regardless of any loss, damage or consequence, whether caused by the negligence of the sender or not, resulting directly or indirectly from the use of any attached files our liability is limited to resupplying any affected attachments. Any representations or opinions expressed are those of the individual sender, and not necessarily those of the Department of Education and Early Childhood Development.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.edulists.com.au/pipermail/destech/attachments/20071019/1f43b38e/attachment.html