Author: Andrew Bennett

Woodwork 5,6&7. Term one 2017 Project : Pine Door knocker Name ____________________________

Wood Project
	Poor 6 pts	Fair 8 pts	Good 10 pts
Measurement	Poor No attention to measurements. Very little accuracy in following plans.	Fair Minor measurement errors. Plans followed but some steps skipped or done incorrectly.	Good Measurements are accurate. Plans followed.
Cuts / Joints	Poor Cuts not square, joints do not fit tightly. Dowel joint not straight	Fair Some minor errors in cuts or joint fit.	Good Cuts accurate. Joints fit tightly.
Assembly	Poor Little care taken in assembly of project. Some pieces do not fit correctly. Evidence of glue components not aligned Project does not function	Fair Minor errors in assembly. Overall assembly is accurate. Minor evidence of glue	Good No visible errors in assembly. No visible glue.
Sanding	Poor Large scratches in wood surface. Sanding across grain is obvious. Not sanded to the proper grit paper.	Fair Some scratches are visible. Some cross grain sanding may be visible.	Good Smooth finish with no visible scratches.
Finish	Poor paint blotchy or incomplete. Finish does not cover all of the bird form or has visible brush marks and bubbles.	Fair Stain is not consistent throughout the project. Finish has minor imperfections.	Good paint is even. Finish is even with only the smallest of imperfections noticeable.
Safety	Poor Student neglects to use proper safety equipment and is careless in the work. Does not keep area neat and organized.	Fair With prompting, student uses safety glasses and ear protection. Student is somewhat careless about work and does not keep area neat.	Good Student uses safety glasses/ear protection, works carefully and keeps work area neat and clutter free.
Craftsmanship	Poor Project has many errors. Student did not apply given talent.	Fair Project has few minor errors. Student applied given talent to satisfactory standards.	Good Project built to detailed standards. Able to be sold in a store. Door knocker functions well

Problems Encounted:
1 How I fixed my difficulty with the project
2 If I were to make this again what would I do differently?